RE: [doc] Flared tailpipes
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [doc] Flared tailpipes



Martin,

The external diameter is 65mm
The top length is 190 mm
The bottom length is 117 mm

That should give the proper angle.

They should be welded on (tacked) so that the old inner pipe is just level
with the bottom bit.(117mm).

Hope that's clear enough! The things I do for you boys, laying on my back
under my cold car port, with my glasses on, torch in hand etc. etc.

Arkwright!


-----Original Message-----
From: Martin Gutkowski [mailto:webmaster@xxxx]
Sent: 13 March 2002 09:43
To: doc-uk@xxxxxxxxxxxxxxx
Subject: [doc] Flared tailpipes

Hiya

Can someone tell me the outside diameter of the '83 flated exhaust tips
please? I know a tubesmith quite well and would like them to make up
some to fit the DeLorean - I dislike my "pea-shooters".

Is the cut on the flaring 45 degrees?

Cheers

Matin



DOC UK Website: www.delorean.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed
public and may be printed in the club magazine **

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated