Does that mean your sorted and up and running, or you just know what the repair is? Paul #6463 ----- Original Message ----- From: "Martin Gutkowski" <webmaster@xxxx> To: <dmcnews@xxxxxxxxxxxxxxx>; <doc-uk@xxxxxxxxxxxxxxx> Sent: Wednesday, November 07, 2001 7:29 PM Subject: [doc] Gearboxes! > Hi All, > > I just had a VERY interesting chat with a gentleman who's big in the > classic Renault world over here. His number was given to me during my > search for a new end casing for my D's box. > > He does a lot of work with these boxes, has a huge stash of parts > (offered me an entire box for £150) and CAN WORK WITH INTERCHANGING > RATIOS. > > If you'd like your D to move a bit quicker off the line, he can drop the > final drive ratio (as per the Euro spec cars) and make the ratios closer > etc etc. Whatever you want basically, and all done by mix-and-matching > parts from the different incarnations of the same box. > > I did check he could modify the transaxle for the rear-mounting and > there's no problem at all. > > He also told me these boxes can take anything up to 450bhp with no ill > effects. > > There's nothing wrong with my box except for this hole in the case, and > it needed a new nut on the shaft (£12 from Renault) > > Seeya > > Martin > #1458 > www.delorean.co.uk > > > > DOC UK Website: www.delorean.co.uk > Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxx > ** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine ** > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >