Paul Is it the inner cable thats broke? because you can pick these up for a couple of quid from your local bike shop. Andy. -----Original Message----- From: paul@xxxx [mailto:paul@xxxx] Sent: 01 November 2001 00:14 To: doc-uk@xxxxxxxxxxxxxxx Subject: [doc] Shameless Promotion I'm selling DeLorean BTTF Technical Spec Posters on EBay: UK Bidders http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1024130052&r=0&t=0&sh owTutorial=0&ed=1004726825&indexURL=0&rd=1 US Bidders http://cgi.ebay.com/ebaymotors/aw-cgi/eBayISAPI.dll?ViewItem&item=597223908& r=0&t=0&showTutorial=0&ed=1004731831&indexURL=0&rd=1 Don't worry if you miss these as I had a few printed and will be running another auction. I have also made a number of Mr. Fusion replicas and will be auctioning them soon! My bonnet/hood release cable broke at the weekend. Luckily I have the emergency release fitted. I strongly recommend that anyone who hasn't fitted this, do it before it's too late. It isn't difficult, just a bit of wire that allows you to reach under the hood and pull the release lever. Anyone know what parts I need to fix this. I'm happy to go to DeLorean Texas but if there's an equivalent part from an old Ford Consul etc. then please let me know! Paul Feagan DOC UK Website: www.delorean.co.uk Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxx ** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine ** Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/