Martin I have a standard Number plate both front and back with standard lettering and this fita no problem. These plates are 52cm wide. Hope this is what your after. Paul (192) ----- Original Message ----- From: "Martin Gutkowski" <webmaster@xxxx> To: <doc-uk@xxxxxxxxxxxxxxx> Sent: Sunday, July 29, 2001 12:22 PM Subject: Re: [doc] Dimensions > PLEASE can someone at least give me the licence plate holder width. I have found a plate for my car, and want to check if > it'll fit with standard lettering. > > Thanks > > Martin > > Martin Gutkowski wrote: > > > Hi All, > > > > Could someone help me out with a couple of dimensions the DeLorean? > > > > What is the width of the numberplate "hole" at the back (mm please :-). > > I'm hoping it's at least 300mm > > > > Also the dimensions of the battery tray would be good > > > > Thanks > > > > Martin > > > > > > DOC UK Website: www.delorean.co.uk > > Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxx > > ** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine ** > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > > DOC UK Website: www.delorean.co.uk > Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxx > ** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine ** > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >