Luke, In the UK there is no specific holder, as our licence plates are longer than yours, most people just drill 2 holes right through the bumper ( facia ), but I did not want to do that with my previously un-registered, "Dusty", so I used very strong "Velcro" ( as people at the giants causeway photo-shoot will know). You could just use strong double-sided tape, but this sometimes , slips, or is very difficult to remove later. Go with Velcro, I used Black for the bit on the car, and white on the back of the plate. It has the advantage that you can keep adding a bit more if you feel the adhesion is not good enough. Works for me. Chris P DOC UK ----- Original Message ----- From: "L Sandel" <ls@xxxx> To: <dmcnews@xxxxxxxxxxxxxxx> Sent: Wednesday, June 13, 2001 7:04 PM Subject: [DML] Euro front plate holder > Hello list, > > Does anybody know of a source for a front license plate holder for Euro > plates? All I can seem to find are holders for USA plates... Specifically, > I'm looking for a way to mount a Euro plate without drilling holes in my > fascia. > > Thanks for any help, > Luke > > > > > Before posting messages or replies, see the posting policy rules at: > www.dmcnews.com/Admin/rules.html > > To address comments privately to the moderating team, please address: > moderator@xxxx > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >