----- Original Message ----- From: "Les Huckins" <jhuckins@xxxx> To: <dmcnews@xxxxxxxxxxxxxxx> Sent: Tuesday, April 17, 2001 3:31 PM Subject: Re: [DML] Louvre Latch > Yeah, I had that, would catch but wouldn't really latch (a good bump would see it > lift free and drop back down). Got a length of threaded stock (any hardware > store), of slightly larger dimension (probably #8), put it in the vise and bent it > to have about a quarter or three-eighths inch (didn't measure, eyeballed it) > longer "grab" point than the stock unit, it now latches perfectly. I thought I > might dip it in dipping plastic so it wouldn't look like a piece of threaded stock > but that hasn't happened yet...put a little black tape around the catch point and > it looks good for now. The original is really mickey mouse, very thin stock and > poor adjustment slots...now if someone would make a real one that would fit and do > the job...! > > > Before posting messages or replies, see the posting policy rules at: > www.dmcnews.com/Admin/rules.html > > To address comments privately to the moderating team, please address: > moderator@xxxx > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >