Fw: [DML] Tail light cover screws
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fw: [DML] Tail light cover screws



What a good idea!

Chris P

----- Original Message -----
From: <milestwo@xxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Tuesday, February 13, 2001 6:48 AM
Subject: Re: [DML] Tail light cover screws


> Go to your local hardware or tool outlet and get a reverse cutting drill
bit,
> a little smaller than the size of the tail light screws. Since these are
> Philips head screws they will start in the center. Almost all of the time
the
> screw will come loose before drilling thru it. Works great on broken bolts
> also, does take a drill that will run in reverse.
> Lloyd--#3502
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated