Re: [doc] paint colour for front and rear fascias

["Richard Hanlon" <rahanlon@xxxxxxxxxxx>]

I used some Rover stuff too for a number-plate recess panel, and found it 
reasonable, if slightly too blue, although it went a bit swirly when I 
lacquered it. (in accordance with instructions!)

There was something in Practical Classics a while ago about colour matching 
from an existing sample.  There's a few places that do it professionally, 
and plenty of old blokes about who've been spraying for years and can match 
'just on t'eye, like'.

I live just north of Derby at the mo, and the nearest professional place 
I've heard of so far is in Burton on Trent...  I'm about to start the trail 
of one-man-bands, but there is (well, was) an excellent chap in Sheffield 
managed to perfectly match an obsolete Fiat colour for me a couple of years 
ago...

>From: Jonieboy@xxxxxxx
>Reply-To: doc-uk@xxxxxxxxxxxxxxx
>To: doc-uk@xxxxxxxxxxxxxxx
>Subject: Re: [doc] paint colour for front and rear fascias
>Date: Thu, 18 Nov 2004 16:09:20 EST
>
>i used a merc bumper colour, not quite as green tint   as originals, i have
>look all over for the formulation for the original colour code but none of 
>the
>european paints companys had one (or could not be bothered to help), 
>John....
>
>
>[Non-text portions of this message have been removed]
>




DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/doc-uk/
   
• To unsubscribe from this group, send an email to:
  doc-uk-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.