RE: [doc] Headliners Reinforcment.....
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [doc] Headliners Reinforcment.....
- From: "Richard" <dickyh11@xxxxxxxxxxx>
- Date: Wed, 15 Sep 2004 23:56:01 +0100
The resin is basically the liquid resin used to make up fibre glass, as
sold in most motor factors.
Mix with hardener and then use a paint brush to give your liner boards a
good coat or two. It will soak into the soft cardboard and harden to
make them nice and tough and not so prone to damp and sagginess.
Obviously you should straighten them out first! I found soaking them
with a garden hose on the yard till they were completely soggy and then
weighting them down with planks of wood and bricks till they were dry
again had the desired effect, though in the present climate this may
take some time :)
Rich H
DOC 365 VIN 1274
> -----Original Message-----
> From: Mike [mailto:mike.bosworth@xxxxxxxxxxxxxx]
> Sent: 15 September 2004 4:42 PM
> To: doc-uk@xxxxxxxxxxxxxxx
> Subject: [doc] Headliners Reinforcment.....
>
> Hiya All
>
> My rear part of my roof liner back board is 'saggy' near to the rear
> windscreen...any one got any ideas how to straighten / reinforce this
> prior to me recovering it?
>
> Heard of soaking this in resin ?...not sure what thats all about
> thou...
>
> Thanks
>
> Mike
> #2001
>
>
>
> ------------------------ Yahoo! Groups Sponsor
>
> DOC UK Website: www.deloreans.co.uk
> Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> ** Unless otherwise stated, all messages posted to the group are
assumed
> public and may be printed in the club magazine **
> Yahoo! Groups Links
>
>
>
>
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
Yahoo! Groups Sponsor |
ADVERTISEMENT
| |
|
Yahoo! Groups Links
Back to the Home of PROJECT VIXEN