Re: [doc] Pulley Nut Help
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [doc] Pulley Nut Help
- From: Martin Gutkowski <martin@xxxxxxxxxxxxxx>
- Date: Tue, 24 Aug 2004 15:44:56 +0100
The problem with using a big bar is that you will bust your right-hand
engine mount getting it off. And you won't be able to apply enough
torque if just using the 5-th-gear-stand-on-brakes method. You'll need
the flywheel locking tool
Martin
nick12dmc wrote:
> This sounds a bit extream Rich! mind you in my frame of mind last
> night C4 plastic explosive was looking like a good idea.
> A friend of mind who is a mechanic poped round today.
> The nut even resisted him. I am going round to his workshop tommorow
> to pick up a large 3/4 drive Mega rachet which is about 1 meter long.
> This coupled with a massive pair of stilson's on the pulley and
> heating the nut up with a top of the line propane mix torch.
> The pulley is probably going to get trashed although we will wrap
> rag round it.
> This should get it off.
> The main problem is the nut has Loctight 601 which my mechanic
> friend says is the main problem. We have to get it hot to burn this
> out.
>
> Regards
> Nick H
>
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
Yahoo! Groups Sponsor |
ADVERTISEMENT
| |
|
Yahoo! Groups Links
Back to the Home of PROJECT VIXEN