Re: [doc] Stainless exhaust
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [doc] Stainless exhaust
- From: "Alistair McCann" <aclassali@xxxxxxxx>
- Date: Fri, 20 Aug 2004 14:05:21 +0100
I would only by a new system if mine failed chris, I will know better this
week when I get an emmisons test done at my local garage. If I were to get
a stainless system I would have it made to the same spec as the original -
looks and all. love this car too much to change it (IM NOT AMERICAN)
The car is in good hands, dont worry!!!!
Any parts I have used that can be seen are old new parts and the car is
still original inside bar a fog light switch.
alistair.
----- Original Message -----
From: "chrisparnham" <secretary@xxxxxxxxxxxxxxx>
To: <doc-uk@xxxxxxxxxxxxxxx>
Sent: Friday, August 20, 2004 9:07 AM
Subject: RE: [doc] Stainless exhaust
Thomas/ Alistair,
I hope you are thinking of a complete system including new manifolds,
hence scrapping the "cross over pipe".
Don at Stainless Exhausts near Nottingham ( www.stainless-exhaust.com
<http://www.stainless-exhaust.com/> ) has made many for the DeLorean
and at about 650 GBP for the whole system, I think they are pretty good
value.
Regarding your car Alistair, PILOT 25, whilst we know the car was under
constant development and improvement whilst within its long life at the
Factory, I personally think it's too important to "muck about" with.
It is after all a very special "Historic" vehicle. (similar to Dusty)
If it still has a cat fitted, you can simply take it off and bash out
all the internal parts; that will help its performance slightly but
leave the appearance unchanged.
Just my opinion, it is after all, your car to do with what you like.
Regards
Chris Parnham
SNIP>>>>
Thomas, Paul has the stainless one on his car. We can ask him about it
next
saturday....
He had it made over here, I know a place near me that will make us both
one
up as I want to change mine aswell. WE SHOULD GET IT AT A GOOD PRICE
FOR
BUYING TWO OF THEM!!!
Alistair.
SNIP>>>
exhaust
I remember a company on the net that done custom stainless steel
exhausts
for the De Lorean. My exhaust is done, so I think I will get one of
those
while I am replacing it, anyone know the address of this place?
Thanks,
Thomas
---------------------------------
[Non-text portions of this message have been removed]
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed
public and may be printed in the club magazine **
Yahoo! Groups Links
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
Yahoo! Groups Sponsor |
ADVERTISEMENT
| |
|
Yahoo! Groups Links
Back to the Home of PROJECT VIXEN