Re: [doc] Head gasket
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [doc] Head gasket



Thanks Martin,
I have bought a compressor and a 36mm impact socket, impact wrench
I can borrow from work.
I will strip her down, change the chains etc.
Might as well do it right.
May need some more advice when it comes to setting the timing and
putting it back together.

Regards
Nick H
Mem 164

--- In doc-uk@xxxxxxxxxxxxxxx, Martin Gutkowski <martin@xxxx> wrote:
> It really is worth investing n a compressor..... But we did get one
off
> using a breaker bar, lots of penetrating oil, a bit of heat and
someone
> standing on the brakes while in 5th.
>
> You must bolt the heads back down.
>
> Our compressor is actually in Baldock at the moment, you're welcome
t
> oborrow it (it's a little thing). I was dismantling my 25 turbo
engine
> in my mate's garage and needed it for getting the crankshaft nut
off!
>
> Martin
>
> nick12dmc wrote:
>
> > Martin,
> > The only thing that put me off removing the cover was the 36mm nut
> > how do you lock the engine to undo it if you don't have air tools?
> > as I understand if you try and turn it with a loose head it
> > will push the liners out in the lower engine
> > Regards
> > Nick



DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **



Yahoo! Groups Sponsor
ADVERTISEMENT
click here


Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated