[doc] Re: Door Mirrors Removal ????.........:)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[doc] Re: Door Mirrors Removal ????.........:)
- From: "Disowned Rogue" <simon.regalspire@xxxxxxxxxxxxx>
- Date: Thu, 01 Jul 2004 15:38:59 -0000
Mike,
From purely an engineering veiw (basically because, depsite me
loving them, my knowledge of deloreans is limited, let alone what i
know of their door mirrors) The ideal finish would be a semi-gloss, I
find high gloss looks cheap and tacky, and would have thought the
ideal would be a two-pack hi-build paint.
If you dont want to go down the path of mixing your own paint and
activator though, you can get a semi-gloss (satin) spray paint that
would do the job almost as well.
Hope this helps, If not you can get better and more detailed
information from autocolour coatings on www.coatit.co.uk or call them
(number on the website.)
Good luck.
Simon
--- In doc-uk@xxxxxxxxxxxxxxx, "Mike" <mike.bosworth@xxxx> wrote:
> Hi to all and the 'fountain of information' :)
>
> I am going to remove the door mirrors and sand them down past the
> poor paint job some numpty has given them over the years :)
>
> Is there any thing anyone can pass on about removing them...
> especially getting the mirror glass out so that i can respray them
> properly? also.....can anyone recommend a good paint finish for
> them??
>
> Thanks again all !
>
>
> Mike
>
>
>
>
>
>
> bozzzy
> #2001
> doc403
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
Yahoo! Groups Sponsor |
ADVERTISEMENT
| |
|
Yahoo! Groups Links
Back to the Home of PROJECT VIXEN