[doc] Re: Not Starting
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[doc] Re: Not Starting



Richard,

I'm not too hot on the workings of the fuel system but could it be
the plunger in the metering head is stuck? that way when you depress
the metering flap you are not actually increasing the fuel to the
injectors.

I should think it's a possibility...... and should just be a case of
removing the metering head and freeing up the plunger, it is such an
exact fit that a small amount of grit/dirt/corrosion on the plunger
can cause it to stick.


James


--- In doc-uk@xxxxxxxxxxxxxxx, "Richard" <dickyh11@xxxx> wrote:
> All,
>
> Here's a challenge.
>
> As I reported a few posts ago my D fires up but won't run.
>
> It's had a new fuel pump, and filter. I have just replaced the
> injectors.
>
> The problem is they don't seem to be spraying at all. With the fuel
pump
> running, and the air flap pressed all the way down I get nothing,
not
> even a dribble. Yet with the injector removed fuel flows out the
banjo
> fitting OK.
>
> I assume there is a lack of pressure....
>
> Any help would be appreciated!!
>
> Rich H



DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **




Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated