Hi,
The old bulbs don't work. (The bulb in the lighter had also blown I
might add). I'm pretty sure I tried every way possible on the LEDs,
but I'll try again tomorrow afternoon. Could the bulbs blow by
themselves if installed incorrectly?
I did notice that the sockets for these little bulbs aren't bullet
proof, you could insert them at every angle so to speak... Maybe the
electrical connectors need some cleaning? That did wonders to my
window switches.
The design of the hazard switch - could it turn out to be a bad
switch, meaning the hazard blinking working, but not the illumination?
Best wishes
Stian Birkeland
Norway
VIN # 06759
--- In doc-uk@xxxxxxxxxxxxxxx, "Dave duke" <dave.duke@xxxx> wrote:
> Check,
>
> Do the old lights work if you put them back in,if they do then
check the led, leds unlike bulbs only let electric flow in one
direction. reverse the positive and negative and try again.
>
> -----Original Message-----
> From: "Mark"<mark@xxxx>
> Sent: 16/02/04 17:41:06
> To: "doc-uk@xxxxxxxxxxxxxxx"<doc-uk@xxxxxxxxxxxxxxx>
> Subject: Re: [doc] Electrical Question - Hazard Light Switch +
Lighter
>
> Hi Stian
>
> I don't want to state the obvious but are the side lights
switch on, The
> hazard switch & cigarette only illuminate when the side lights
are on.
>
> Mark
> ----- Original Message -----
> From: "Stian Birkeland" <delorean@xxxx>
> To: <doc-uk@xxxxxxxxxxxxxxx>
> Sent: Monday, February 16, 2004 1:39 PM
> Subject: [doc] Electrical Question - Hazard Light Switch +
Lighter
>
>
> Hi,
>
> I'm in the process of changing out regular bulbs with LEDs.
> I did the Head Light Switch yesterday, it lights up beautifully
in
> green illumination.
>
> Then I changed the little bulbs in the Hazard Light Switch and
> Lighter. They didn't light up at all.
>
> What's the catch here? Fuses or a short in the wires?
>
> Does something have to be turned on for the Hazard Light Switch
and
> Lighter to be illuminated?
>
> Funny thing is - the Hazard Lights work and are blinking when
the
> switch is operated, same thing with Cigarette Lighter, it heats
up
> then pops out...so why #¤"(%/"? doesn't the little lights
inside
> these switches light up?? Neither the regular bulbs nor the LEDs
> seems to work. Are the Cigarette Lighter and Hazard Switch on
the
> same wire/circuit?? Where should I look for solving this
problem.
>
> Any help is much appreciated!
>
> Best wishes
> Stian Birkeland
> Norway
>
> VIN # 06759
>
>
>
> DOC UK Website: www.deloreans.co.uk
> Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> ** Unless otherwise stated, all messages posted to the group
are assumed
> public and may be printed in the club magazine **
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
> DOC UK Website: www.deloreans.co.uk
> Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> ** Unless otherwise stated, all messages posted to the group
are assumed public and may be printed in the club magazine **
> Yahoo! Groups Links
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
Back to the Home of PROJECT VIXEN