 
Re: [doc] missing o-ring and clip helpppppppppppppppp!
    
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [doc] missing o-ring and clip helpppppppppppppppp!
- From: "essexdick" <tny1964@xxxxxxx>
- Date: Tue, 20 Jun 2006 19:56:05 -0000
    cheers Nick, i have the o-ring, but its the retaining ring iv 
lost for it,if i had a piece of alloy tube tigged with a piece of 
pipe the right size, would this obstruct anything as im a bit fed up 
trying to get the pipe back in everytime the timing needs setting?   
     cheers tony  ps i think its been out a while ie since Lotus
--- In doc-uk@xxxxxxxxxxxxxxx, Nick Tomlinson 
<nickandkathryntomlinson@...> wrote:
>
> buy a new one?
>   it might have gone under the inlet manifold, oooh
>   if it is still you could try a long reach magnetic pickup around 
there and hope it clicks.
>    
>   NickT.
>    
>   p.s. if you are desperate then good old silicon sealant globbed 
round the end of the brass tube could be a temporary solution.
> 
> essexdick <tny1964@...> wrote:
>           Hi everyone, im in a little bit of bother, the pipe from 
the idle 
> motor which goes just in front of the ditributor into the main 
body, 
> well the o-ring and clip have vanished. I have looked everywhere, 
in 
> the valley of death, chassis,every orifice underneath the car as 
well.
> Does anyone have any suggestions of what i can do,to sort this 
problem 
> out.. yours in hope Tony TT
> 
> 
> 
>          
> 
>  		
> ---------------------------------
>  Try the all-new Yahoo! Mail . "The New Version is radically easier 
to use" ? The Wall Street Journal
> 
> [Non-text portions of this message have been removed]
>
------------------------ Yahoo! Groups Sponsor --------------------~--> 
See what's inside the new Yahoo! Groups email.
http://us.click.yahoo.com/2pRQfA/bOaOAA/yQLSAA/HliolB/TM
--------------------------------------------------------------------~-> 
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine ** 
Yahoo! Groups Links
<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/doc-uk/
<*> To unsubscribe from this group, send an email to:
    doc-uk-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN