Re: [doc] steering bushing, which method?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [doc] steering bushing, which method?



thanx Martin

just undo the two big bolts then and slide the column up a bit?

have already undone the pinch bolt and plenty of release oil.

i did buy the bushing from you a while ago.

this is one job i'll be glad to get done.

Regards

Steve
vi 1621



--- In doc-uk@xxxxxxxxxxxxxxx, Martin Gutkowski - DMC Ltd 
<martin@...> wrote:
>
> The way to do it properly is to remove the column
> 
> >with this method do i need to remove the binnacle or column 
switch gear
> >(so far removed knee pad)
> >
> No. Switch gear is part of the column. It will need to be 
unplugged but 
> that's it.
> 
> Martin
>







DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine ** 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/doc-uk/

<*> To unsubscribe from this group, send an email to:
    doc-uk-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated