 
[doc] Re: Torque settings
    
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[doc] Re: Torque settings
- From: "Mike Bosworth" <mike.bosworth@xxxxxxxxxxxxxx>
- Date: Sat, 18 Feb 2006 13:06:40 -0000
Hi Paul
Recently done this 'little task' so its still fresh to me.... 55 FT 
Pounds  (75 Nm) Trailing arm to pivot bush 
Just make sure that you put the same number of shims back in as you 
took out on both sides and torque the TA bolts back up with the 
weight of the car on the suspension as so not to preload the bolt.
How are you going to do this job on a garage ramp / pit i hope, did 
mine over a pit and its still a pig of a job...
I have a few pics etc of the procedure if you would like them?
I am in the process of writing a little 'how to' on this one as like 
NickT, work gets in the way of play times.
Hope you have a manual rather than an auto :)
Kind Regards
Mike
#2001 New radio nearly fitted ....goodbye Craig....
doc 403
--- In doc-uk@xxxxxxxxxxxxxxx, "Paul" <willinot@...> wrote:
>
>  
> 
> I have just bought a set of bolts to replace my existing trailing 
arm bolts.
> The rating on them is 12.9 instead of the original 10.9.  What is 
the Torque
> setting I need to use for these?  Is it the same as the original?
> 
>  
> 
> Thanks
> 
>  
> 
> Paul (162) Belfast
> 
> 2493
> 
> 
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.375 / Virus Database: 267.15.10/263 - Release Date: 
16/02/2006
> 
> 
> 
> -- 
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.375 / Virus Database: 267.15.11/264 - Release Date: 
17/02/2006
>  
> 
> 
> [Non-text portions of this message have been removed]
>
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
    
  
  
    SPONSORED LINKS
  
       
  
  
  
  YAHOO! GROUPS LINKS
  
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN