 
[doc] Re: faulty ecu help?
    
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[doc] Re: faulty ecu help?
- From: "essexdick" <tny1964@xxxxxxx>
- Date: Mon, 05 Dec 2005 17:24:20 -0000
      Im not sure but i think Nick T repairs them maybe.
       cheers tony vin#3484
 --- In doc-uk@xxxxxxxxxxxxxxx, "blackaddertoo" <blackaddertoo@xxxx> 
wrote:
>
> hi
> 
> finally getting to the root of my running problems.
> now have intake manifold reinstalled. car did the same, ran for 30 
> secs then gets bogged down and stalls but if i remove the idle 
speed 
> motor cable, then the car idles ok at 1800 revs.
> so to fault find do i need to check the earth to the ecu, the 
diode, 
> the feed from the coil and the motor and the ecu.
> i connected the cable back, statred and engine started to stall 
> after 20 seconds, i then pulled the cable of and engine slolwy 
> picked back up to 1800 revs.
> therefore is the idle speed motor working but the ecu is feeding it 
> duff info and making it too lean or rich?
> anyone any good ideas? and Martin, if i parcel posted the ecu to 
you 
> are you able to fully test? or plug into another car?. if i was 
near 
> you i'd book the car in1.
> 
> thanks for any help.
> 
> regards
> 
> steve
>
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
    
  
  
    SPONSORED LINKS
  
       
  
  
  
  YAHOO! GROUPS LINKS
  
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN