 
[doc] Re: K-Jet fuel pressure gauge kit
    
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[doc] Re: K-Jet fuel pressure gauge kit
- From: "blackaddertoo" <blackaddertoo@xxxxxxxxxxx>
- Date: Tue, 11 Oct 2005 23:55:01 -0000
Hi Martin
i'll have to order one as i am guessing a bit as to the problem.
in theory i should have good running/rest pressure but she runs for 
30 secs then chugs and stalls.
am comming to think it could be injectors as would it run initially 
on cold start valve fuel and then off the injectors, but if 
rusty/blocked then could this be the problem?.
would the pressure test kit point me in the right direction, ie if 
the injectors are receiving the fuel at correct pressure, then it is 
either the injectors themselves, electrical (but i don't think this 
is it) or vacuum but can't find any obvious leaks.
do i just pay through DMUK? or now LTD.
regards
Steve
--- In doc-uk@xxxxxxxxxxxxxxx, Martin Gutkowski <martin@xxxx> wrote:
>
> Yes mate, £59 now though. I have to order one in for you but it'll 
only 
> be a couple of days. I've deliberately done things a bit 
differently 
> from the other kits, to make things easier as the one I got from 
the US 
> is a pain to use! The price difference is because it now comes 
with 
> double M8 banjo bolts which are quite expensive, but are required 
for 
> testing individual injector pressures.
> 
> Best Wishes
> 
> Martin
> 
> blackaddertoo wrote:
> 
> > Hi Martin
> >
> > is this kit now available, and with any instructions??
> >
> > i think i need to check the system now as i need the car running.
> >
> > Steve
> >
> >
>
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
    
  
  
    SPONSORED LINKS
  
       
  
  
  
  YAHOO! GROUPS LINKS
  
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN