 
Re: [doc] Bonnet/hood  Locked, Cable Broke cannot get in - HELP!
    
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [doc] Bonnet/hood  Locked, Cable Broke cannot get in - HELP!
- From: "Mike Bosworth" <mike.bosworth@xxxxxxxxxxxxxx>
- Date: Tue, 28 Jun 2005 08:30:33 -0000
-If you need to replace the actual cable a standard bike brake cable 
is all thats needed :) ....mine was off a bmx, just thread the cable 
through the existing external black sleeving..
Regards
Mike
#2001/403
--- In doc-uk@xxxxxxxxxxxxxxx, "mrvic20" <mrvic20@xxxx> wrote:
> Thanks Nick
> 
> I got it open using that method - I love the DOC!
> 
> many thanks
> 
> Craig DOC388
> Vin 16723
> 
> --- In doc-uk@xxxxxxxxxxxxxxx, Nick Tomlinson 
> <nickandkathryntomlinson@xxxx> wrote:
> > I'm sure if I remember correctly, if you get underneath the left 
> hand front wheel arch (remove wheel) then you can pop up the rubber 
> blanking plug for the top of the brake fluid reservoir, then use a 
> stretched out coat hanger with a small bend in the end to act like 
a 
> U shaped hook, to pull the bonnet release mechanism (and use some 
> luck)
> >  
> > I am sure this was covered with a nice diagram in a Deloreans 
> magazine tech column.
> >  
> > NickT.
> > 
> > mrvic20 <mrvic20@xxxx> wrote:
> > MOT on wednesday but cannot open bonnet at the mo. The cable had 
> been 
> > bodged with a nut on the end rather than the original 
> stopper...the 
> > bolt has come off....aghhhhhhhhhhhhhhhhh!!!!
> > 
> > After poking for an hour i have no success. any magic tips. If i 
> > cannot put fuel in i will not make it to the mot garage...oh no
> > 
> > Please say there is a magic solution
> > 
> > many thanks
> > 
> > Craig 388
> > VIN 16723
> > 
> > 
> > 
> > 
> > DOC UK Website: www.deloreans.co.uk
> > Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> > ** Unless otherwise stated, all messages posted to the group are 
> assumed public and may be printed in the club magazine ** 
> > Yahoo! Groups Links
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> >             
> > ---------------------------------
> > Yahoo! Messenger NEW - crystal clear PC to PCcalling worldwide 
> with voicemail
> > 
> > [Non-text portions of this message have been removed]-- In doc-
uk@xxxxxxxxxxxxxxx, "mrvic20" <mrvic20@xxxx> wrote:
> Thanks Nick
> 
> I got it open using that method - I love the DOC!
> 
> many thanks
> 
> Craig DOC388
> Vin 16723
> 
> --- In doc-uk@xxxxxxxxxxxxxxx, Nick Tomlinson 
> <nickandkathryntomlinson@xxxx> wrote:
> > I'm sure if I remember correctly, if you get underneath the left 
> hand front wheel arch (remove wheel) then you can pop up the rubber 
> blanking plug for the top of the brake fluid reservoir, then use a 
> stretched out coat hanger with a small bend in the end to act like 
a 
> U shaped hook, to pull the bonnet release mechanism (and use some 
> luck)
> >  
> > I am sure this was covered with a nice diagram in a Deloreans 
> magazine tech column.
> >  
> > NickT.
> > 
> > mrvic20 <mrvic20@xxxx> wrote:
> > MOT on wednesday but cannot open bonnet at the mo. The cable had 
> been 
> > bodged with a nut on the end rather than the original 
> stopper...the 
> > bolt has come off....aghhhhhhhhhhhhhhhhh!!!!
> > 
> > After poking for an hour i have no success. any magic tips. If i 
> > cannot put fuel in i will not make it to the mot garage...oh no
> > 
> > Please say there is a magic solution
> > 
> > many thanks
> > 
> > Craig 388
> > VIN 16723
> > 
> > 
> > 
> > 
> > DOC UK Website: www.deloreans.co.uk
> > Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> > ** Unless otherwise stated, all messages posted to the group are 
> assumed public and may be printed in the club magazine ** 
> > Yahoo! Groups Links
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> >             
> > ---------------------------------
> > Yahoo! Messenger NEW - crystal clear PC to PCcalling worldwide 
> with voicemail
> > 
> > [Non-text portions of this message have been removed]
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
---- LSpots keywords ?>
  ---- HM ADS ?>
  
  
  
  YAHOO! GROUPS LINKS
  
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN