[doc] Re: Clutch Bleeder....

["Mike Bosworth" <mike.bosworth@xxxxxxxxxxxxxx>]

Shame i cant spell thou....its still early in my defence :)

--- In doc-uk@xxxxxxxxxxxxxxx, "Mike Bosworth" <mike.bosworth@xxxx> 
wrote:
> Hi all thought this link from the DML was a great idea for those 
of 
> you who have the manual  and about time too:)
> 
> Looking froward to seeing you all on Monday ....hope the waeter 
> holds up :)
> 
> Regards
> 
> Mike
> 403/#2001
> 
> 
> 
> Group,
> As you know it has been discussed several time about how hard it 
is 
> to
> get to and bleed the clutch fluid through the slave cylinder.
> Well it's done, The unit has been built tested and parts ordered 
and
> will be ready to ship in about 10 days. I am making them with an
> industrial grade valve, Stainless Steel hose with Teflon inner 
liner
> and a modified bleeder screw that screws into the slave cylinder.
> Take out the old bleeder screw and screw in the new one and tighten
> with the nut. No special tools and leave it installed.
> If you have any question, feel free to call. If it's ordered with 
the
> clutch kit you can take off $5.00.
> 972-564-9321
> John Hervey
> 
> http://www.specialtauto.com/delorean-parts/clutch-transmission.html





DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/doc-uk/
   
• To unsubscribe from this group, send an email to:
  doc-uk-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.