 
[doc] Re: Replacing rear speakers
    
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[doc] Re: Replacing rear speakers
- From: "Phill Wright" <psw@xxxxxxxx>
- Date: Wed, 27 Apr 2005 19:26:17 -0000
Hi Dan,
I used Pyramid 4108GS 300W 3-way units (they are 4 ohm, no 8 as the 
originals, they are on offer here - only £23.95 pair - free UK 
delivery!
http://tinyurl.com/9sxud
Now, they are 4 x 10 but the magnet is 1/2 inch bigger than the Craig 
jobbies - but if you take the speaker mount brackets out of the car, 
flatten the 3 locating tabs and rebend them wider they will fit fine -
 you also need 2 new 4" jubilee clips as the original ones are too 
small. Also (minor point) on the original Craigs, the -ve connection 
on the spkr is a thin one, the +ve a normal size one, the new spkrs 
both have standard size push connector terminals - I just snapped the 
thin terminals off the old scrap spkrs and soldered em onto the new 
spkr -ve terminal so the original wiring didn't need altering.
The new spkrs are gold mylar cones with twin units centre mounted - 
300W claim is probably more 'Clive Sinclair' power rating rather than 
RMS or Peak, but they are certainly well beefier than the originals. 
I only have the original Craig radio at the moment as my DAB unit 
hasn't landed yet, so have yet to give em a good blast of power :-)
Cheers
Phill W
DOC 233
VIN 6772(sorbet)
Avantime (M4TRA) 
--- In doc-uk@xxxxxxxxxxxxxxx, Daniel Shane <daniel.shane@xxxx> wrote:
> Hi Phill,
> 
> What speakers did you fit and where did you get them from ?
> 
> Cheers
> 
> Dan
> 
> 
> On 27/4/05 11:24 am, "Phill Wright" <psw@xxxx> wrote:
> 
> > 
> > Hiya,
> > 
> > I've just done mine - wasn't half as bad as I thought! I can email
> > you my phone number if you want to have a chat about it ...
> > 
> > Phill W
> > DOC 233
> > VIN 6772(sorbet)
> > Avantime(M4TRA)
> > 
> > 
> > --- In doc-uk@xxxxxxxxxxxxxxx, "Chris Williams" <chris@xxxx> 
wrote:
> >> > 
> >> > I have been searching thru the archives over the last day or 
so of
> > all 
> >> > the different delorean web sites, looking for an artical with
> >> > diagrams/and or pictures for the repalcing of the rear 
speakers. I
> >> > know that I have seen this once before somewhere but cannot 
find it
> >> > again. If any one knows where this artical is and can e mail 
me the
> >> > link or indeed tell me the easiest way to replace the rear 
speakers
> > it 
> >> > would be appreciated.
> >> > Thanks all,
> >> > Chris
> >> > vin #4584
> > 
> > 
> > 
> > 
> > 
> > DOC UK Website: www.deloreans.co.uk
> > Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> > ** Unless otherwise stated, all messages posted to the group are 
assumed
> > public and may be printed in the club magazine **
> > 
> > 
> > 
> > Yahoo! Groups Links
> > * To visit your group on the web, go to:
> > * http://groups.yahoo.com/group/doc-uk/
> > *  
> > * To unsubscribe from this group, send an email to:
> > * doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> > <mailto:doc-uk-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>
> > *  
> > * Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service
> > <http://docs.yahoo.com/info/terms/> .
> > 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
Yahoo! Groups Links
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN