Re: [DML] Revsese WAS: Why the DeLorean?

["Paul Salsbury" <paul.salsbury@xxxx>]

Let me join here, Iwas only talking about lifting for reverse with Martin ,
yesterday, It wasn't until he mention the lift that I knew it happened. I
have a 5 speed manual that does not need to be lifted to go into reverse,
and thats not 'cause it worn (i don't think) as there is no vertical
movement at all in the gear stick, it just does not lift.

Is this right if not whats wrong??

Paul

6463
----- Original Message -----
From: "Les Huckins" <jhuckins@xxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Friday, December 28, 2001 4:51 PM
Subject: Re: [DML] Revsese WAS: Why the DeLorean?


> I meant pulling up on the shifter to put it into reverse. Mine go into
gear nicely, hot
> or cold, no grinding, very clean shift, it's just the effort of pulling
the shifter up
> and putting it into the reverse position that I was referring to. Mine
are both the
> same, I figured they all were.
>
> > Not to be picky Les, but it should not be stiff shifting into
> > reverse. When cold, my car will go into reverse with the greatest of
> > ease. When warm, it will grind unless I put it into first gear
> > first, to stop the input shaft from spinning. But even when I do
> > that it still goes into reverse without resistance.
>
>
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>