RE: [DML] regraining

Here is a video someone took of me at a Delorean Mid-Atlantic gathering several years ago.

As I state several times in the video, I am NOT any kind of expert, but it should help give you the basic idea

http://www.youtube.com/watch?v=_Kt8VmzREko

From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx]
Sent: Friday, October 31, 2014 2:15 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] regraining

Start With 3M blending pad or you can use sandpaper electro oxide

220/400/600/800/1000/2000 then you should be fine.

I prefer the sandpaper, its faster just be careful because to much pressure can remove the grain although that will still take awhile so you would notice

I am actually removing my grain to have a mirror like finish.

But you can just go with grain only both wet and dry sand

Good luck its a loooong process but can be done cheaply

I've done two fenders and the t top and that's taken me about 60 hours, yes 60!

But just scratches should be a fraction on that

Sent from my iPad

On Oct 31, 2014, at 9:35 AM, "'Ed Cohen' rdcejc@xxxxxxxxxx [dmcnews]" <dmcnews@xxxxxxxxxxxxxxx> wrote:

Is there any information about regraining and removing scratches on my Delorean. What type of material should I use to regrain etc. any info will be most appreciated.
Ed
6944

This email is free from viruses and malware because avast! Antivirus protection is active.