With the majority of Delorean frames in uncertain states of rust..is it really worth risking a cracked windshield..with the door(s) open and jacking up with a homeowner floor jack on ONE corner of the car..you are most definitely stressing out the structure of the Delorean..and anything can happen. claude 1024 bric --- In dmcnews@xxxxxxxxxxxxxxx, <jamettee@...> wrote: > > Claude, > While the doors are definitely a structural part of the car, you can most definitely lift the car off the ground with the doors open. I've done it a number of times on my 2-post lift & I have also seen pictures of the DMC shops with cars on lifts with doors open. I don't make it a habit on my car & only do it when I still need access to the interior, but it can definitely be done. > > > I've also jacked a car up at 1 point with a jack to change a wheel. Granted the doors were closed when I did this, I don't believe it would be much different with the doors open. There may have been a few instances of cracked glass, but I believe it is a myth that's greatly been exaggerated in the DMC community. > > > Justin Mettee > VIN 02075 > > > ---In dmcnews@xxxxxxxxxxxxxxx, <cbl302@> wrote: > > Wayne.. most of the flex has to do with the frame flexing/twisting.. if you jack up a delorean with the door(s)open...as some owners had found out the hard way..when they found that their windshields cracked when they jacked up their deloreans with the doors open..even cases where the rear window cracked/broke..the doors act as a rigid part of the built in safety cage and integral part of making the delorean frame and black body into a rigid structure. NEVER jack up a delorean with the doors open..not even with one of the doors open. > > Also that is one of the reasons why Lotus had to use toll booth windows..if you had/have a one piece window that could open..you would lose some of the integrity that was engineered into the doors..since the majority of the weight of the delorean door is on the lower half, below the window...no matter how the delorean door was structurally engineered the vertical side pillars on the doors,especially where they bend towards the roof will ALWAYS be the weak points...and they truly did a lot of engineering to overcome that problem..but still...they will bend in the right situation. > > Claude > 1024 > Bric > ------------------------------------ To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: dmcnews-digest@xxxxxxxxxxxxxxx dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo Groups is subject to: http://info.yahoo.com/legal/us/yahoo/utos/terms/