[DML] Re: Cut keys and decoding at DCS

["cbl302@xxxxxxxxxxxxx" <cbl302@xxxxxxxxxxxxx>]

Or sometime down the road you will end up like me...with no Deloreans...BUT a bunch of spare keys for deloreans,

So now I put one each in the "trunk area" of my cast Delorean models,

What a surprise when someone pops open the trunk on my models and sees a "real" delorean key in the trunk.

Claude
1024
Bric  

--- In dmcnews@xxxxxxxxxxxxxxx, "jtrealtywebspannet" <jtrealty@...> wrote:
>
> Bill, you are missing the point. Many people may not be bringing their car to DCS but if they only bring their keys they can avail themselves of James's offer and get some code cut keys. If you have worn keys or keys that have been duplicated and not cut by code this is a chance to get some properly cut keys. We are not talking about someone who is locked out or some other kind of emergency where you have to call a local Locksmith. At the very least they can get their key "read" and put the code away for future reference. Some people try to prepare for problems ahead of time. I didn't say fitting a key by impression is going to damage a lock, it is just if you are making a key by impression in a worn lock you are going to wind up with a cr-ppy key. BTW, any good Locksmith CAN disassemble the lock and not damage it. Most will advise against that and recommend replacement. They know it is cheaper to replace an old, worn lock than to spend the customer's money trying to repair it.
> David Teitelbaum
> 
> --- In dmcnews@xxxxxxxxxxxxxxx, "content22207" <brobertson@> wrote:
> >
> > Taking the ignition lock cylinder out and opening it up is most likely to damage it. Simply wiggling a key blank then filing away the marks isn't going to damage anything -- the tumblers move up & down on tiny springs as even a cut key slides in and out. If your lock cylinder is so dysfunctional that it won't accept a blank, it isn't going to accept a cut key either.
> > 
> > I'm not arguing against spare keys -- I always travel with one in my pocket simply because my original has an unusual cut that requires the shoulders to be filed off an X29 blank -- just against the suggestion that a *COMPETENT* locksmith needs to take the cylinder out of the steering column and open it up to make another key.
> > 
> > Note that the keycode above the headliner is not a universal code -- only DMCH can interpret it. If you take that keycode to an independent locksmith he won't have any idea what it means -- something to keep in mind if you need a key cut outside of DMCH's business hours. Also, even if DMCH cuts a key, it still has to be mailed to you. I'm not talking about getting a spare key at DCS'12 -- I'm talking about problems, especially while you're on the road or away from home, the other 362 days of the year.
> > 
> > Bill Robertson
> > #5939
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > --- In dmcnews@xxxxxxxxxxxxxxx, james@ wrote:
> > >
> > > I've seen locksmiths screw up the internals of this now "no longer available" part. I'm not saying its not possible to do as Bill relates, but in my experience in regards to DeLoreans, its the exception rather than the rule. 
> > > 
> > > IMO, sometimes locksmiths are like many mechanics - they think they know more than they do, and while well-intentioned, they'll make things worse rather than admit they're in over their head.
> > > 
> > > Knowing your ignition keycode - particularly if you have an early, two-key system where the code is not likely to be written under the headliner - is great insurance.   
> > > 
> > > James
> > > 
> > > Sent via BlackBerry from T-Mobile
> > > 
> > > -----Original Message-----
> > > From: "content22207" <brobertson@>
> > > Sender: dmcnews@xxxxxxxxxxxxxxx
> > > Date: Mon, 11 Jun 2012 11:50:05 
> > > To: <dmcnews@xxxxxxxxxxxxxxx>
> > > Reply-To: dmcnews@xxxxxxxxxxxxxxx
> > > Subject: Re: [DML] Cut keys and decoding at DCS
> > > 
> > > My point is: a competent locksmith does not need to remove the lock cylinder to make a key from scratch -- it is not necessary to take the ignition cylinder out of the steering column.
> > > 
> > > A competent locksmith can also unlock a car door in a matter of seconds just by picking it -- I've seen that done as well (I've also tried it myself, with negative success).
> > > 
> > > Bill Robertson
> > > #5939
> > > 
> > > --- In dmcnews@xxxxxxxxxxxxxxx, "jtrealtywebspannet" <jtrealty@> wrote:
> > > >
> > > > That is called fitting keys by "impression". It works, but cutting by code is the more exact way to do it if you have the codes and the equipment to do it. Cutting by code is the preferred method, it doesn't matter if the lock is worn, you are not fitting a key to a worn lock. For fleet service typically all of the vehicles are keyed alike, that way you never have to go hunting for keys. All owners of Deloreans should avail themselves of James's service. If they do not have TWO sets of code cut keys they should have them made. At the very least you should verify you HAVE the code for your car. James can "read" the code off of your keys and then you should record it. Using a worn key that is a bad copy will just wear your locks faster. If you find you have to jiggle or wiggle your key to make your lock work you need to fix it before you get locked out. A little powdered graphite to lubricate the locks is always a good idea too.
> > > > David Teitelbaum
> > > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > [Non-text portions of this message have been removed]
> > >
> >
>




------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/