[DML] Potential Problem With Ed Uding Brackets

["content22207" <brobertson@xxxxxxxxxxxx>]

I just received an eMail from an owner who has had the bushings pull out of his Uding brackets.

I foresaw that might happen. As designed, you are totally dependent upon the lips on the bushings alone to keep them from pulling through, so I overlaid my inset Uding washers with fender washers (same OD as the bushing face). Look closely at the pics in my Facebook album and you will see that the entire bushing face is covered by a washer. The only way my bushings could pull through would be to deform those washers.

Bill Robertson
#5939








------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/