[DML] Re: Door Alignment

["David Teitelbaum" <jtrealty@xxxxxxxxxxxxx>]

The shims on the body side of the hinge control up-and-down. The shims
on the hinge to the door affect in-and-out. Alignment is achieved when
the door is not above or below the ajacent panels and the gaps between
the door and the ajacent panels is approximitley equal all around or
at least similar to the other side. This can take a lot of trial and
error till you get it close enough to be acceptable. You may have to
adjust the nearby panels to get a good fit.
David Teitelbaum
vin 10757


--- In dmcnews@xxxxxxxxxxxxxxx, "Joe" <skateboarderx24@...> wrote:
>
> thanks David. 
> 
> I'll take your advice about propping the door open. 
> 
> Right now I've been aligning to the panels and thats somewhat hard
> since no matter how hard I try it doesn't happen. I also tried aliging
> to the door with the panels after I was happy at one point. 

------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/