[DML] Re: output shaft seal leak - final solution?

["Dave Swingle" <swingle_dmc@xxxxxxxxxxx>]

That will work, although just getting rid of the raised part of the 
ridge and using sealant will work. I've seen that problem. Seal 
pullers are much harder than the aluminum case....

Dave S

--- In dmcnews@xxxxxxxxxxxxxxx, Soma576@... wrote:
>
> Hi Group,
> 
> If I recall, there is a small scratch in the casing where a seal 
puller slipped during my first replacement.? Is is possible to sand 
the area down slightly to remove any ridge, and then wipe some JB 
Weld or something with my finger into the scratch?? > 
> Thanks,
> 
> Andy
> 
> 
> [Non-text portions of this message have been removed]
>



------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/