[DML] Throttle spool R&R - How to?

["Tom Tait" <TTait@xxxxxxxxxx>]

When disassembling 3238 for a fresh water pump and tune up, the throttle rod got hung up so badly on the throttle spool ball that I broke the ball off the spool (yes, I had removed the wire clip).

The new throttle spool control plate 102782 and linkage rod have arrived and its time to carefully disassemble the old spool and put on the new part.

The car is an auto so it has the second cable on it as well.

This strikes me instinctively as a simple mechanical part and common sense should dictate the procedure.  Usually my instincts about these things are dead wrong, so, can anyone offer tips, warnings, or a procedure?  I didn't find one in the service manual.


[Non-text portions of this message have been removed]


------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/