Re: [DML] Hard Start/ Bad Idle
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Hard Start/ Bad Idle
- From: "Jason Rowe" <jonnier@xxxxxxxxxxxxxx>
- Date: Sat, 24 Mar 2007 11:38:14 -0500
Well, I checked the fuel distributor plunger and that may have been a lot of
my problem. After putting it back together it started right up. I waited until the
next morning and tried it again and sure enough it started right up and actually
was staying running but only barely. I'm going to drain the gas in it and put
fresh in and see what happens then. Hopefully this will take care of everything.
I will also ceck the screen in the warm-up regulator but I believe I did clean it
at one time while it was sitting but I'll double check anyway. Thanks for all the
suggestions so far. I'll check them as I get them so if you have any ideas let me
hear them. Thanks again everybody.......................Jason #5903
[Non-text portions of this message have been removed]
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/dmcnews/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:dmcnews-digest@xxxxxxxxxxxxxxx
mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN