RE: [DML] Fuses: Attention vendors addendum

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Cecil,
In dealing in the electronics industry for 20+ years, it's up to the builder
of the holder to build in the terminal thickness and quality of the holder.
I carry Bussman and Littlefuse which are of the highest quality but It's the
holder we have that is of low quality. 
If you checked the terminal retention of the original fuse block and mine,
mine is about 4 to 5 times tighter than the original due to material
thickness and retention. The original DeLorean are just not very good.
That's why you have melt downs.
John Hervey





-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf Of
dmc82@xxxxxxxxxxx
Sent: Thursday, August 17, 2006 8:49 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] Fuses: Attention vendors addendum

I agree with Marc and the poor quality of fuses. How about additionally
fuses with thicker blades so they make a more secure contact with the aging
contatcts.

Cecil Longwisch
#10663

[Non-text portions of this message have been removed]






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links



 







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/