[DML] Re: door lifts & struts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: door lifts & struts



The short answer is Yes, there is a way to adjust the torsion bars.
The long answer is NO, you cannot do it without some special tools,
knowledge, and experience. If, when you open the doors and you lift
the door open all the way and it stays up all the way then I would
leave the doors alone. If , when you let go and they sag closed any
then I would recomend an adjustment. Either go to a local Delorean
club or a vendor if you need to get the torsion bars adjusted.
David Teitelbaum
vin 10757



--- In dmcnews@xxxxxxxxxxxxxxx, "rdcejc@..." <rdcejc@...> wrote:
>
> I JUST RECEIVED NEW DOOR STRUTS AND INSTALLED THEM.  THE DOORS STILL
DO NOT SEEM TO STAY FULLY OPEN.  IS THERE A PROCEDURE TO ADJUST THE
TENSION ON THE DOORS TO MAKE THEM FULLY OPEN?  ANY HELP IS MOST
APPRECIATED.
> ED 
> 6944
> 
> 
> rdcejc@...
> EarthLink Revolves Around You.
> 
> [Non-text portions of this message have been removed]
>









To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated