[DML] Clutch master cylinder reservoir cap

["ksgrimsr" <knut.s.grimsrud@xxxxxxxxx>]

Hi guys,

Over the weekend, I replaced all the brake fluids in my car using my 
new nifty Branick pressure bleeder setup. It is a really slick 
little tool consisting of a tank with a diaphram in the middle of 
it. You fill the brake fluid above the diaphram and hook up the 
fittings to the reservoir, and you pressurize the lower portion of 
the tank with compressed air. The setup then pushes brake fluid into 
the the reservoir and all you have to do is open the petcocks on 
your calipers to have the new fluid pushed through the system.

For use with my brakes, I just bought a spare brake reservoir cap 
and modified it with the proper fitting.

I'd like to flush my clutch hydraulics on my cars next. 
Unfortunately, the cluch reservoir cap seems to be a relatively rare 
item, and I don't want to destroy a rare item as part of making a 
pressure bleeder fitting out of it.

I only need some sort of cap that will screw securely on the clutch 
reservoir to adapt. Does anyone know of some cap that might be 
suitable to this use that will screw securely onto the clutch 
reservoir with a good seal? It does not have to be original (but it 
does have to create a good seal).

   Knut









To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/