[DML] Re: Where to route the stainless clutch line??

["Matt Spittle" <supermatty@xxxxxxx>]

You should put a length of flexible rubber tubing over the new clutch
line to keep it from gradually abrading the epoxy off of the frame, as
well as the adjacent hoses.  Just get a length of hose the same
length, cut a slit down the side of it to get it over the stainless
line, and then use zip ties to keep it attached.

Matt
#1604








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/