Re: [DML] Axle nut/socket size?

[Warren Wallingford <warren@xxxxxxxxxx>]

You may have the later 36mm nuts on the outside of the hub.  The inner 
nut that holds the angle drive will still be 1 1/4".
Warren at DMC



Tom Tait wrote:
> I know I'm making a stupid mistake somewhere here.
> 
> The DMCH website says I can remove my axle nut (for angle drive
> replacement) with a 32mm socket.  That specific socket has proven hard
> to find, but when 32mm is converted to SAE it comes out to 1.259 inches.
> My 1 1/4" socket should fit a bit snugly, but its no where close.
> 
> First, I assume the basic issue is that one can't just convert mm to
> inches and expect sockets to fit because ___________  (fill in the blank
> - Metric measures the larger diameter tip to tip on the bolt where SAE
> measures the distance between parallel faces?)
> 
> So where do I get a socket that fits?  No luck at either Pep Boys or
> Lowes.
> 
> Tom




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/