[DML] Manifold Studs

[DMCVIN6683 <dmcvin6683@xxxxxxxxx>]

I just got all of my manifold studs out today. I had one broken one 
that was broke off inside the head.

What i use to remove it was a Left Hand Drill Bit and a center punch.

A left Hand Drill Bit is a Drill Bit that is used in the Reverse speed 
of the Drill. Most Drill bits are used in the forward speed, this means 
when you are drilling out a manifold stud you are also tightning it 
too. With a Left Hand Drill Bit you are using it in the Reverse speed 
so that means you might get lucky and back the stud out while you are 
drilling into it.

I got lucky and it backed out while i was drilling into it.

What i did was use the center punch to mark a spot on the stud in the 
center so i would have indent so the drill bit wouldnt wander when i 
was starting to drill.

Just an FYI for you all in case you do this job for yourself.

Mark V





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/