[DML] Re: torque numbers

["gullwingmag" <gullwing-magazine@xxxxxxxxxxxxx>]

If your looking for more info try...

http://www.norbar.com/content/cms/TorqueValueGuide.pdf

There is a lot of info on the web for torque values that will get you 
in the ballpark.

Ron

--- In dmcnews@xxxxxxxxxxxxxxx, "David Teitelbaum" <jtrealty@xxxx> 
wrote:
>
> Try A:03:04 or C:02:03 Sump Fixing Bolts. I didn't find a torque 
value
> for the rocker cover bolts but you can probably use the same torque
> setting. I just get them snug and then a little bit more.
> David Teitelbaum
> vin 10757 
> 
> 
> 
> --- In dmcnews@xxxxxxxxxxxxxxx, Soma576@xxxx wrote:
> >
> > Group,
> >  
> > I am looking for the correct torque values for the oil pan bolts 
and
> the  
> > valve covers.  I searched the shop manual and these are not listed
> with the  rest 
> > of the torque recommendations.  
> >  
> > Any ideas?
> >  
> > Andy
> >  
> > Fargo, ND  
> > 1982 DeLorean DMC12 VIN 11596
> > 
> > 
> > 
> > [Non-text portions of this message have been removed]
> >
>








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/