[DML] Re: Dash & Door VIN plates
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: Dash & Door VIN plates
- From: "Joe OBrien" <joeyoseppijoe@xxxxxxxxx>
- Date: Sun, 08 Jan 2006 05:23:05 -0000
My thoughts exactly Stan. I only wonder if it would eb possible to
reproduce Patricks plate since it is already blank, and then just
stamp out our existing vin number on it.
It is just so much better looking than the flat black plate we have now.
-Joe O'Brien
2524,
16634,
16851
--- In dmcnews@xxxxxxxxxxxxxxx, delorean@xxxx wrote:
>
> I don't have the Parts Manual with me right now, but I'm quite sure
that the
> dash VIN plate shown in the manual is the one with the DMC logo and
N. Ireland
> written on it. Just like the one shown in the Photo section. So this
would
> indicate that this was the *intended* plate. Now the question is
this - why did
> the factory change the smart dash VIN plate to the grey or black
"boring" one?
> These later plates really looks like a fake when compared to the one
in the
> door. In my opinion, the original with the logo and N. Ireland
should have been
> used on all cars.
>
> Best wishes
> Stian Birkeland
> Norway
>
> VIN # 06759
> ________________________________________________________________________
> >
______________________________________________________________________>
From: "James Espey" <james@xxxx>
> > Subject: Dash & Door VIN plates (was: Does anyone else have one of
these?)
> >
> > We don't have any blank dash VIN plates, period. We don't have the
> > machine to stamp the numbers on VIN plates, dash or door.
> >
> > The original part number for the dash VIN plate was 106113 and was
> > aluminum with black logo as the one you have.
>
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN