[DML] Re: Eibach springs/shock set
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: Eibach springs/shock set
- From: "Christophe Vieira" <chris_delorean@xxxxxxxxxxx>
- Date: Thu, 15 Dec 2005 22:36:30 -0000
There is 3 positions to adjust the rear spring seats on PJ Grady's
shocksso I can fix it for the rear. James told that the final high is
reached after about 1000 miles and I put on them only 250 on them.
To mix shocks and spring, both parts must have the same working area.
After it's a matter of characteristics, you can use Eibach springs
with Spax, Koni or other brand of shocks.
I did not complain because handling is there (much much better than
before) and I think that PJ Grady's performance shocks are really good
with Eibach springs.
Regards,
Chris.
--- In dmcnews@xxxxxxxxxxxxxxx, "Dave Swingle" <swingle@xxxx> wrote:
>
> Are the rear shocks that Chris used adjustable? I believe that if you
> put the Eibach springs on rear shocks that are stock, or designed to
> operate only at the stock height, the rear is going to sit low but
> about 1/2 inch. The DMCH rears are adjustable to compensate for this
> as part of the design. (So are Marty's by the way). I have no idea
> why the front would appear high, unless the shocks you used are
> severely pressurized. I have seen the same springs end up at
> different heights on different cars for no particular reason. (yes -
> we have swapped springs around cars trying to figure some of this
> out).
>
> Sometimes its not good to "break up" a system, and when you mix and
> match different vendors' systems, you can't complain to the system
> integrator since it's yourself.
>
> Dave
>
> --- In dmcnews@xxxxxxxxxxxxxxx, doki_pen <doki_pen@xxxx> wrote:
> >
> > That is definitely NOT the look I'm going for.
> >
> > Jon
> >
> > ----- Original Message ----
> > From: Christophe Vieira <chris_delorean@xxxx>
> > To: dmcnews@xxxxxxxxxxxxxxx
> > Sent: Wednesday, December 14, 2005 12:16:06 PM
> > Subject: [DML] Re: Eibach springs/shock set
> >
> >
> > Hello,
> >
> > I installed on my car DMCH Eibach spring and PJ Grady perfo shocks.
> > I use to drive fast and handling is really great with this setup and
> > yes, it could be better if ride was a little more firm. We do not
> use
> > to drive "barge" in Europe. ;-)
> >
> > The only "bad" point about Eibach spring is that the front is still
> a
> > little too hight on my car.
>
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN