[DML] Emissions
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Emissions



Wonderful news in that vin 4258 failed its emissions idle test.  
Readings at 686 RPM were 289 for HC and 4.25 for CO% when 220 and 1.2 
are legal limits respectively.  I have read through my tech service 
manual and it says that I don't want to adjust the idle mixture screws 
since they are factory set and don't need subsequent adjustment.  So, 
where should I start- is this easy as an air filter change (it 
probably needs one) or is it the cold start valve or thermotime 
switch, or a new direction completely.  BTW the same readings were 72 
HC and .8 CO% at the high speed test (2378 RPM) which passed.

Any thoughts?







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated