[DML] Torsion bar adjustment: Complete
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Torsion bar adjustment: Complete



First, big thanks to everyone who helped me out here. Both the driver
& passenger side torsion bars have been adjusted properly. The doors
now open with virtually no bounce at the end of travel. With any luck,
I should never have to touch them again; just replace the struts when
they start to droop.

Some notes from the procedure:

1. The threads on the right of the passenger side bracket were
stripped beyond repair. A "recoil" kit was used to fix this. Let me
tell you, these recoil kits aren't cheap, but it did one hell of a
job. Quite frankly, I believe the repair is stronger than the original
threads were. I was very hesitant to do this but when all was said and
done, it was a simple 5 minute procedure.

2. There's no need to make that wooden thing and mess with long
extensions, etc. A hex key, pipe, and removing the louvers takes care
of it. Huge thanks to those who pointed this out, you saved me a good
deal of time and money.

3. Removing & reinstalling the louvers is a simple task. Again,
literally a 5 minute procedure.

4. The tension on these torsion bars is really no big deal. We were
prepared for a lot of wrestling and pain - pulled the bolts and
thought, "That's it?" Carrying my 2 year old around a store is more
work than holding the tension on these bars. If it weren't for the
back and forth nature required to get the brackets off, I could do
this by myself.

5. The driver's side bracket finally came off. We bent a couple of
screwdrivers up in the process, but it came off. Lubed it up with
anti-sieze and the next 3 times we had to take it off (due to me
missing the proper notches twice in a row, doh!) it was much easier.

Again, I appreciate everyone's assistance.

--
- Ryan
http://www.memfrag.com - Memory Fragment Search & Storage


To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated