[DML] HELP - Can't get car running after maintenance!

["sweetp01569" <paul.sweet@xxxxxxxxxxxx>]

Hello everyone,

I just finished changing my water pump, hoses, Valley of Death clean-
up, spark plugs, wires, cap, rotor.  When I tried to start the car 
this morning, it turned over, started briefly for a couple of 
seconds, revved to around 1100 rpms, then quickly died!  On another 
attempt, I tried playing with the gas pedal to keep it running when 
it started.  I managed a few more seconds, but nothing steady.  As 
soon as my foot releases the pedal, it dies.

I believed I was very thorough with the spark plug and cap wire 
order, fuel line assembly, etc.  Could I have knocked some idle 
adjustment out of whack when I removed the throttle cable spool?  
Where should I start to get the car running again? 

Before I did this work, the car purred like a kitten, but wanted to 
change plugs, wires, and water pump for preventative maintenance.  I 
didn't know how old the plugs and wires were.

Any advice would be appreciated.

Thanks,

Paul
Vin 10944








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/