[DML] Re: AC system compressor doesn't cycle, high discharge pressure

["Marty Galbreath" <marty@xxxxxxxxxxxxxx>]

here 'tis:

http://www.sanden.com/index.html

Go to support, look through the tech stuff for all kinds of good 
info.

Marty



--- In dmcnews@xxxxxxxxxxxxxxx, "Videobob Moseley" <videobob@xxxx> 
wrote:
> What is the website you were using as a reference?
> - VB
> 
> >From: "Marty Galbreath" <marty@xxxx>
> >Reply-To: dmcnews@xxxxxxxxxxxxxxx
> >To: dmcnews@xxxxxxxxxxxxxxx
> >Subject: [DML] Re: AC system compressor doesn't cycle, high 
discharge 
> >pressure
> >Date: Fri, 12 Aug 2005 12:33:30 -0000
> >
> >
> >
> >Last night I did some more work and proved beyond a doubt that my
> >compressor is indeed shot. Using procedures I gleaned from
> >Sanden's website, I saw that the pressure between the high and
> >low side would equalize in only 20 seconds after being turned off.
> >The spec is at least 2 minutes. I then recovered enough Freon so
> >that the compressor would cycle normally, 7 sec on, 9 sec off. I
> >went on a test drive and everything worked well for about 5 
minutes,
> >then quit. Returning home and connecting my gauges, I saw that the
> >pressure in both the high and low sides was 80 psi. I believe the
> >compressor is toasted. I'll update after I install a new one.
> >
> >Many thank to all who have replied!
> >
> >
> >Marty
> >#3765
> >
> >
> >
> [moderator snip]






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/