Re: [DML] Rear Louvers hitting stainless T-Panel

[Wayne Wagner <dmc-2447@xxxxxxxxxxxxx>]

I found a post when searching for T-Panel Reinforcement earlier this week, but there is also a tech paper at:  http://www.dmcnews.com/Techsection/tbar.htm, which I think is the same entry.
 
Regards,
Wayne / VIN#2447
www.AA9DY.com


Jason Perkins <jperkins@xxxxxxxxxxxxx> wrote:
Hmm, my search didn't return any previous posts, so lets start a new one
:-)

I just realized that my rear louvers after much opening / closing are
rubbing the back T-Panel. It also appears the back T-Panel is now
slightly bent under on the rear left side. 

Now I have loosened the bolts (and removed the struts) to adjust the
louvers. If I move the Louvers to far back then they wont lock any
more. This is really a tight fit to not hit the rear T-Panel, and still
get it to lock. 

Any suggestions for getting this to fit just right? Or should I keep
pushing till it fits :-) 





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links









[Non-text portions of this message have been removed]





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/