[DML] Re: Poor airflow thru heater-A/C
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: Poor airflow thru heater-A/C
- From: "stainlessilusion" <5n-@xxxxxxx>
- Date: Thu, 21 Jul 2005 15:18:25 -0000
Have you installed the foam piece over the opening in the back of the
heater box? There was a screen over the evaporator in my car, only it
didn't stop small things like pine needles from getting stuck in the
fins...Only way around it for me was removal, then again I was
installing a new evaporator anyway. You could also try compressed air
up the drain tube, which may loosen some things that are stuck in the
box. -----Dani B. #5003
--- In dmcnews@xxxxxxxxxxxxxxx, "Dave Swingle" <swingle@xxxx> wrote:
> I'm having an issue with the Air conditioner/Heater where not much air
> comes thru the vents (or the floor for that matter). Compared to my
> other D, the airflow on "4" is about like "2" but it's definitly
> running the fan on high.
>
> I've verified that all correct flaps are opening, the blower works OK
> (makes lots of good blower noise, and with the fan out and on the bench
> it seems to run plenty fast). Putting the setting on "max" does not
> make any difference, and the recirc door is opening.
>
> The only thing that it seems to me that's left is an evaporator thats
> full of crud - has anyone seen this and come up with a way to clean it
> without taking the car apart?
>
> Dave Swingle
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN