[DML] hvac unit

["Marty Galbreath" <marty@xxxxxxxxxxxxxxxxx>]

Well, it was bound to happen. In the restoration of my car I have had 
everything apart for cleaning / restoration with the exception of the 
climate unit. Now after a lot of sweat and contortioned limbs I have 
it out and apart on my bench. Pulling the engine was easier(IMHO).

What a mess! I had detected a small leak in the evaporator which I 
intended to replace. I ordered up John Hervey's kit. After the 
difficulty of getting the climate unit out, I ordered a NOS heater 
core from DMCH. (I support ALL of the vendors:) 

Now I am looking at a bunch of rusted flaps with no foam attached 
anywhere. I intend to coat all the metal parts with POR15. I am 
wondering what others have done to replace the foam? I was thinking 
about using headliner material which has a foam backing, but am
unsure 
what the downside might be. I would install it with the clot side 
against the metal and the foam out. Opinions?

Marty Galbreath
3765






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/