[DML] Shifting and sealing problems, M/T

["stainlessilusion" <5n-@xxxxxxx>]

Hey guys, another problem I'm hoping to get some help on. When I am 
shifting, the gears will grind only when shifting into 2nd or 5th. I'm 
not shifting super fast but I am shifting fast; I don't think the 
speed of shifting is my problem otherwise it would grind in all gears. 
It was also really difficult to shift it into 5th on the highway at 
high speeds I had to force it hard into gear. The only way for the 
gears not to grind is to shift out of the gear, and wait a few second 
before putting it into the next gear. This has only started happening 
this year, I never had this problem before. The clutch master cylinder 
and slave cylinders have been replaced within the last 4 years and are 
fine; I haven't needed to add fluid in years so you can rule those out 
as a problem. I also could use a bit of help on the lip seal 104216, 
on the right side of the transmission if you were looking at it from 
the rear of the car forward. I've replaced this seal twice within a 
year and this side is still leaking, what am I doing wrong? Thanks for 
all the help! ------Dani B. #5003






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/