[DML] Re: Trailing Arm Bolt replacement
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: Trailing Arm Bolt replacement
- From: "sweetp01569" <paul.sweet@xxxxxxxxxxxx>
- Date: Tue, 24 May 2005 21:57:14 -0000
Thanks you, Toby. You have been helpful. As long as there are
detailed instructions for do-it-yourselfers, I am willing to give it
a shot, probably later this summer.
--- In dmcnews@xxxxxxxxxxxxxxx, "Toby Peterson" <tobyp@xxxx> wrote:
> Paul - There was a poll done on the DML a few years ago regarding
the
> experiences out there with the trailing arm bolts. Out of those
who
> responded (well over 100 people as I recall), about 1/3 had some
form
> of failure (bent, broken, seriously corroded, seized in place with
> rust, etc.), 1/3 had inspected and found no problems (yet), and
1/3
> didn't know or didn't care (blissful ignorance). In my opinion
(and I
> might be a little bit biased), I think that every prudent and
> thoughtful DeLorean owner should know exactly what the condition
of
> these bolts are in their car, knowing that the bolts will corrode,
> bend, (or worse) eventually. The bolts can be changed by the
typical
> DeLorean owner with moderate mechanical skills, some basic tools,
ramps
> and jacks. There have been several articles written in the DML
and
> elsewhere on "how to", and every purchase of TOBY-TAB's comes with
> detailed instructions. The only complication comes when an
automatic
> transmission is involved. The driver's side bolt is a little more
> difficult to replace due to interference with the transmission
> housing. I hope this has been helpful.
>
> Toby Peterson VIN 2248 "Winged1"
> DeLorean Parts Northwest, LLC
> www.delorean-parts.com
>
> --- In dmcnews@xxxxxxxxxxxxxxx, "sweetp01569" <paul.sweet@xxxx>
wrote:
> > Is this job do-able in the home garage, or does it have to be
done by
> > a more experienced mechanic? If done at home, are there any
archived
> > message threads or files that cover the procedure for
replacement? I
> > have not yet checked the original bolts on my car. Is
replacement
> > (Toby TABs?) an automatic "must do" for a Delorean owner?
> >
> > Thanks,
> >
> > Paul - one month owner of VIN 10944
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN